Characteristics of titanium plate:
1. Titanium seed plate is a surface oxide film that acts as a good durable and wear-resistant separation agent. Using titanium seed plate saves separation agent, making it easy to peel off the electrode plate and eliminating the need for pre-treatment of the seed plate. Titanium seed plate is half lighter than copper seed plate.
2. The service life of titanium seed plates is more than three times that of copper seed plates, and can reach 10 to 20 years depending on operating conditions
3. Electrolytic copper produced from titanium seed plates has a dense crystal structure, smooth surface, and excellent quality.
4. As the titanium seed plate does not require the application of a separating agent, it can avoid contamination of the copper electrolyte.
5. Improve production capacity and reduce the production cost of electrolytic copper, thereby achieving better economic benefits.
Titanium plate manufacturing process:
Hot forging is a forging process carried out above the recrystallization temperature of metal.
Hot rolling is a rolling process carried out at temperatures higher than the recrystallization temperature.
The rolling process in which the plastic deformation temperature of cold rolling is lower than the recovery temperature.
Annealing: A metal heat treatment process in which a metal is slowly heated to a certain temperature, held for a sufficient period of time, and then cooled at an appropriate rate (usually slow cooling, sometimes controlled cooling).
Acid washing: Immerse the workpiece in an aqueous solution such as sulfuric acid to remove thin films of oxides and other substances on the metal surface. It is a pre-treatment or intermediate treatment for electroplating, enamel, rolling and other processes